Pebble watch charging dock for Core Devices USB-C dongle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two versions available. Print it solid, or print without top & bottom layers & add an infill to suit your style
- Ocena
- 4,4 / 5
- Polubienia
- 24
- Pobrania
- 123
- Wydruki
- 4
- Wyświetlenia
- 661
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Two versions available. Print it solid, or print without top & bottom layers & an infill to suit your style.
Uses the USB-C nomad style charging dongle sold by Core Devices. Will not fit the old style Pebble Corp charging cables.
V2 improves on V1 by adding in a stop for the dongle, and a slot for the string, and reducing the top corner slightly to allow the curved Pebble Round 2, Pebble Time, Pebble Time Steel and Pebble Time Round watches to charge on the dock.
Shown printed in PLA at 0.1mm layer height using a 0.25mm nozzle (will be fine with larger nozzles).
Can be printed solid, but these images are with zero solid top & bottom layers. Infills are 10% Honeycomb on a 30 degree fill angle, and 4% Archimedian Chords on 120 degree fill angle