Surron Seat Kit for Razor SX500
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ditch that stock junk
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 31
- Wydruki
- 1
- Wyświetlenia
- 245
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a full kit to replace the; less than stellar, stock seat on the Razor SX500. It includes front and rear seat mounts, as well as a gap filler piece that's sorta neat.
I put quite a bit of time into refining this; but alas, nothing is ever perfect. If you run into any design issues, please let me know, and I will try to implement any ideas.
If you like my work and want to show some extra love, please do so here -> Paypal
I used the following settings:
Gap Filler: Modifiers for 100% concentric infill on screw holes for strength. Rest is 2 walls, alternate extra wall, 8% gyroid infill, align infill to model. Also slowed this one down a bit to avoid lifting.
Front & Rear Mounts: 8 walls, alternate extra wall, 8% gyroid, align infill to model.
PETG or ASA would be the smart move for strength and UV resistance.
This is what I rolled with on my Snapmaker U1. Use your best judgement and adjust accordingly.