Villeroy & Boch SupraFix plastic mounting nut
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement for the black plastic mounting nut used in the **Villeroy & Boch SupraFix** (Compact / 2.0 / 3.0)
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a replacement for the black plastic mounting nut used in the Villeroy & Boch SupraFix (Compact / 2.0 / 3.0) hidden toilet seat fixing systems. The original factory plastic part is prone to cracking or stripping over time, which makes the toilet seat loose. Instead of buying an expensive whole new official mounting kit, you can just print this replacement sleeve. Tested and fits perfectly with the original metal bolt and washer mechanism shown in the reference pictures.
Print Settings
Material: PETG, ASA, or ABS is highly recommended for durability and chemical resistance (bathroom cleaning agents). Avoid PLA, as it is too brittle and might creep under constant tension.
Perimeters / Walls: Set a high wall count (4-6 perimeters) or select enough walls to make the part completely solid. This provides much better mechanical strength and tension resistance than simply increasing the infill percentage.
Orientation: It is best to print this part tilted/angled rather than completely flat or vertical. This orientation changes the layer line direction, preventing the layers from splitting under the mechanical tension of the bolt.
Supports: Yes, required due to the tilted printing orientation and the internal cutouts.