Scotts EdgeGuard Mini All-Terrain Wheel Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Convert your Scotts EdgeGuard Mini to 10" pneumatic tires for smooth rolling on uneven lawns. Print in PETG.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
This is a modification kit to upgrade your Scotts Turf Builder EdgeGuard Mini Broadcast Spreader with heavy-duty HAUL-MASTER 10 in. Pneumatic Tires. By replacing the stock plastic wheels, you'll get much better traction and smoother rolling across uneven lawns.
Print Settings
Material: PETG (Highly recommended for outdoor durability and UV resistance)
Supports: None needed
Quantity: Print 2 of each printed component (2 Hubs, 2 Collars).
Hardware Required
Aside from your printed parts, you will need the following hardware to complete this build:
Qty | Item | Notes |
|---|---|---|
2 | HAUL-MASTER 10 in. Pneumatic Tires (Black Hub) | Harbor Freight item |
4 | M5-0.80 x 20mm Metric Cap Screws | |
4 | M5-0.80 Coarse Hex Nuts | |
4 | Stock Hub Bolts | Reused from the original tire hubs |
Assembly Instructions
⚠ Safety Note on Hub Modification
You must completely deflate the tires before unbolting the split rims. This project requires modifying the metal wheel hubs using a grinder or rotary tool. Wear appropriate eye and ear protection during the grinding step.
Step 1: Prep the Pneumatic Wheels
Completely deflate the tires by pressing the valve stem core. Do not skip this step, as split rims can be dangerous to unbolt under pressure.
Unbolt the factory hardware holding the metal HAUL-MASTER wheel hubs together.
Split the hub halves apart to safely remove the tire and inner tube.
Pop the factory bearings out of the metal hub halves. (They are no longer needed since the wheel will lock directly to the spreader's rotating axle).
Take the front half of the metal hub and grind out the center opening until its inner diameter clears and fits snugly around the printed hub piece.
Step 2: Reassemble the Wheels with Printed Hubs
Place the printed hub into position against the modified metal wheel hub.
Reassemble the tire, tube, and metal hub halves, ensuring the inner tube doesn't get pinched.
Secure the printed hub to the wheel using the original factory bolts you removed in Step 1.
Re-inflate the tires to the recommended PSI.
Repeat this process for the second wheel.
Step 3: Install on the Spreader
Slide the newly assembled pneumatic wheels onto the Scotts axle.
Use the printed Collars, along with the M5 cap screws and hex nuts, to clamp and lock the wheels securely into place on the axle.