Infinity Cube Plant Stand / Joinery Model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 5" interlocking infinity cube with traditional offset joinery. Perfect as a test model or a geometric plant stand!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an Infinity Cube, which forms a continuous geometric line in the shape of a cube. I designed it with a traditional offset layout where the interlocking sides extend slightly past the top and bottom faces. The finished cube measures 5 inches square.
I originally designed this joinery to build a wooden table. To test the complex interlocking joints and ensure everything aligned perfectly, I 3D printed this scaled-down version first. It worked out so well that the printed prototype now lives on my desk as a unique plant stand!
Printing Details
Orientation: Print pieces in the orientation shown in the model files.
Layer Height: 0.2 mm
Infill: 20-50%
Supports: Yes (Required on Short-90 bars)
Parts List & Assembly Instructions
The complete assembly requires a total of 18 pieces. Refer to the included Offset Cube Assembly diagram for a step-by-step visual guide.
(12) Long Bars (Labeled as L in the assembly guide)
(6) Short Bars (Labeled as S-90 in the assembly guide)
Step-by-Step Assembly
Build the Top and Bottom Frames: Connect two Long Bars (L) together, then cap the ends with two Short-90 (S-90) bars to form a square frame. Make 2 of these frames.
Build the Vertical Corners: Connect two Long Bars (L) together at a right angle to create a vertical corner post. Make 2 of these corner assemblies.
Build the Side "U" Frames: Connect two Long Bars (L) together at a right angle, then attach a single Short-90 (S-90) to one of the open ends to form a "U" shape. Make sure the two assemblies mirror each other: one should have the exposed tongue on the long bar, and the other should have the tongue on the short bar. Make 2 of these mirrored assemblies.
Base Assembly: Lay one of the square frames from Step 1 flat on your work surface. Attach the two vertical corner pieces from Step 2 so they face opposite corners.
Mid-Section Assembly: Slide the two "U" sections from Step 3 into the sides so that their remaining vertical long bars meet up at the same corner.
Final Cap: Align and press the remaining square frame from Step 1 onto the top to lock the entire infinity cube together. (Glue can be used for a permanent stable hold)