1 / 5
Picatinny rail instead of rear sight Scar L/H
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement for the lost rear sight on the rail.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed for the Cyma airsoft gun, the rail fits very tightly and can be used without bolts, but if in doubt, you can also use an M3 bolt and nut. I'm not sure how it will fit other brands of airsoft guns, but in theory it should fit them as well.
The bar comes in two versions: left and right hinges for fastening. The names correspond to the sides; choose one of them.
Eryone Petg GF 10 (glass fiber) was used for printing, with supports, layer thickness 0.15, and infill 30%. Choose the settings that best suit your plastic.