OOONO CO‑Driver NO2 Sunvisor Clip with Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reinforced sunvisor clip for the Ooono Co‑Driver with a discreet cover that hides the device but keeps lights visible
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 92
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial
A sunvisor clip for the Ooono Co‑Driver No2. Since devices like this are not allowed in some countries, I wanted to make the gadget a bit more discreet. By adding a clear PETG window between the cap and the Co‑Driver, it’s no longer immediately obvious what the device is, while the indicator lights remain visible.
The USB‑C port is still accessible while the device is mounted, so you can charge it without removing it from the clip.
The top and side buttons remain fully accessible as well.
The original model is truly well‑designed — many thanks to the creator.
For the viewing window I used clear PETG. I ran some tests before printing the final part to ensure that it is translucent enough for the lights to remain visible, yet diffuses the light sufficiently so that the lettering is no longer readable. For these tests I used Stefan’s (CNC-Kitchen) model (https://www.printables.com/model/273948-test-model-for-transparent-petg-printing), which was also an excellent starting point for tuning my print settings.
Since the best parameters for this part can differ widely (dependend on your printer and filament), I have to add here the disclaimer, that these settings worked the best for my combination of printer and filament. You might have to tweak them to achieve good results.