1 / 2
Rubber Band / Bungee Cord Sling Glider Launcher — zdjęcie 1
1 / 2

Rubber Band / Bungee Cord Sling Glider Launcher

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An ergonomic and robust design for launching gliders.

Ocena
0 / 5
Polubienia
1
Pobrania
2
Wydruki
0
Wyświetlenia
50
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

This can be printed in any rigid plastic (I used PLA+) and assembled with long brass heat stake inserts, and #10-24 x 3/4" long flat head screws. 1/8" elastic bungee cord recommended, but a rubber band would work as well.

Tagi