Motorcycle kill switch inspired Decora light switch cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Decora-style light switch cover inspired by the motorcycle kill switch
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A cover for Decora-style light switches, inspired by motorcycle engine kill switches. No MMU or AMS needed.
Required Hardware:
8x Round magnets (6x2mm)
Round double-sided tape (usually 10mm diameter)
Superglue
Assembly Instructions:
Use double-sided tape to attach the button to the rocker.
Use superglue to stick the magnets to the magnet holders.
Attach round double-sided tape to the back of magnet holder #2 (See image).
Press the case against the original cover. Magnet holder #2 should stay on the original cover, leaving the case removable.
Check out my full collection of light switch covers here: https://www.printables.com/@ETZ_3D/collections/3557286
Keywords: decora, light switch cover, single switch, rocker switch, wall plate, motorcycle, kill switch, engine start, moto, garage decor, biker, rider, magnetic, no mmu, no ams, home decor, snap fit, novelty