Adapterplate for Liftrollers (Heberollenadapterplatte)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapterplate for lift rollers to mount the wheel to a aluminum extrusion profle.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 8
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I guess not many have use for this, but since I needed something to have a better mouting option than the default holes in the plate with only two little screws I created this.
I added the step file, so you can edit the mounting holes for the specific rollers you have.
My rollers have a plate with 50x20mm spacing with 5,5mm screw goles.
The countersunk mounting holes are M8, I used M8x20mm screws for it.
The adapter has 3mm holes that can take M4 panhead screws to mount the wheels. I used M4x10mm.
Beware the minimum height for your wheels from the ground so it can still lift the object but is free when set down. For my wheels it is 38mm. In the CAD I added 4mm for the rubber feet of my simrig and 3mm extra margin. Thats the space from the bottom (where the ears are) to the ground, if your wheelplate also has a rectangular mounting plate.
I printed it with 60% gyro infill and 5 perimeter walls, variable height in PETG which is sturdy and can lift the simrig without breaking. I don't recommend to sit on it though. Just for moving it.