Dishwasher Clean/Dirty Indicator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple indicator you can attach to your dishwasher to indicate if it is clean or dirty.
- Ocena
- 5 / 5
- Polubienia
- 120
- Pobrania
- 258
- Wydruki
- 2
- Wyświetlenia
- 1328
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
A simple indicator you can attach to your dishwasher to indicate if it is clean or dirty. It measures 64 x 24 x 5.7 mm.
No multi-material printing needed. Simple assembly with no glue required.
To assemble, press the cover into the groove at the top of the frame. Then insert the tags from underneath. Then press the base plate into the frame. The little tabs will lock the base plate into the frame. There is a small chamfer on one face of the base plate - this is the top of the plate and should be facing inside the frame.
The seam on the cover might cause it to wedge a bit tighter on one side. Use a knife to shave off the seam to get it to to slide smoothly. If the cover slides too loosely, you can put a small sliver of tape on each side of it to increase friction.
Printing tips:
The frame should be printed upside down so that no supports are needed
Using the variable layer height setting for the cover will produce a better finish on that part.
Print the 'clean' and 'dirty' tags in different colours to differentiate between them.