150mm Counterclockwise AC Hose to Trotec Window Connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapts a standard 150mm AC hose to the Trotec window outlet connector
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 139
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement adapter for connecting the Trotec AC window outlet for my Trotec PAC 2000 E portable AC unit to a standard 150mm counterclockwise hose.
I printed mine with a 0.6mm nozzle with 3 walls in PETG, and I highly recommend printing it at 45º to ensure the shear angle of the layers doesn't align with the main forces applied to it. Similarly, I used a random seam position. Both standard and tree supports are a bit of a pain in the arse to remove, so I would recommend adjusting your settings to make them easier or using PLA as the support material if you have multimaterial support.
I have a model for connecting the hose to the AC unit as well: