1 / 8
Toyota 1MZ-FE Ignition ,Injector, and Main Wiring Protectors — zdjęcie 1
1 / 8

Toyota 1MZ-FE Ignition ,Injector, and Main Wiring Protectors

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed for the Toyota 1MZ-FE engine to protect the ignition, injector, and main wiring harnesses on the valve covers.

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
34
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Designed to fit the Toyota 1MZ-FE engine found on a variety of Toyota and Lexus models from the 1990s through the 2000s. The original wire protectors were made of PP, and over time, heat, and engine cleaning, turned into dust (also from exhausted mechanics). A trip to a savage yard and you can't find many in sight. Using the partial parts I could salvage, I recreated the parts in the spirit of the originals, and even marked them with the part numbers (Toyota did not sell them as separate parts, but only with complete hardnesses which have all been discontinued). More modern models have these parts available for order separately. You could also just wrap the wires and ship!

I recommend printing these is PA6-GF25 or better. Note: The engine covers were made from PA6-GF25 and is still in solid shape 30 years later. I tested using grey and yellow PLA for fit, then transferred over the nut torque limiters (brass furrles) to the 3D printed replacement parts. I used ABS for the rafts and supports to easily break away and set the printer to PA-CF for interface. I adjusted the profiles for PA6-GF25 then printed.

Tagi