AOS UL5 Drone Parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drone feet, GPS holder, dual antenna supports, and XT60/Buzzer holder for AOS UL5 or other drones with 32mm spacing.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
A collection of parts for an AOS UL5 build. The separate parts are drone feet, support for a dual antenna (e.g. DJI O4 Pro), caddy for buzzer and XT60 plug, and a front GPS mount. Note that the frame design calls for a XT60 plug where I wanted to mount the GPS. The feet are held by the M2 motor mounting screws. I sized the holes to allow for a 5mm washer on the screws to get a stronger hold on the motor.
The parts were printed in TPU on a Core One using the Prusa Slicer Sainsmart TPU filament setting. Always completely dry TPU for best results.
The Fusion 360 design file is included if you want to modify these parts for your specific situation. The parts would be compatible with other drones with a 32mm rear standoff separation and a standoff length of at least 20mm.