Flick 'em Up! Blacksmith Expansion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was looking for something to do and I thought heck, I can redesign this building.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was looking for something to do and I thought heck, I can make this building. This is a model that you can print and use for the Flick 'em Up!: Blacksmith expansion. Listed at https://boardgamegeek.com/boardgameexpansion/234136/flick-em-up-blacksmith
You'll need to print the shop, the legs, and the horseshoes. I modeled the shop to be multicolored with print/stop method. If you print at .2 mm, stop at layers 5, 9, 12, and 22. I opted to start with white to gray to black to brown, then to blue (as pictured).
I printed the legs and horseshoes at 30% infill as I wanted a little weight. (I'll report back when I get a playtest in) I did the shop at 15%.
Enjoy!
Category: 3D Printing