Quacks Insert for Chips/Tokens with Printed Frames
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted to remix to accommodate quacks with 3D printed frames and fit in the original box insert with no modification.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original https://www.thingiverse.com/thing:3770505 was too small. The remix https://www.thingiverse.com/thing:3800363 was big, but wasn't big enough.
This is designed to accommodate more space as the frames add about 2 cm to length, height, and width. I printed the frames from https://www.printables.com/model/386078-quacks-of-quedlinburg-token-and-coinframe-update-t . Unfortunately, no one sized their insert for these exactly.
I also made the improvement that these boxes will fit in the original box (see pictures, I did modifiy the middle and bent the insert so the sides were flush with the box...need that extra 10 cm). I then made from scratch inserts for the Recipe Books, Potions and the Fortune Cards. (the potions sit under the Fortune Cards. Both the recipe book, potion and fortune card slots will allow more for expansions (I own neither), but you'll need to print more things and alter your box if you do.
TLDR Print: 4 Triple Chip Boxes 3 Single Chip Boxes 1 White Chip Box (optionally print this a different color, I had meant to and ran out of grey) 1 Component Box (optionally print this a different color) 9 Lids (all boxes are sized to it) 1 Card Holder
Optional Print: Card Spacer (I printed this with 0 layers of top and bottom and at 5% infill. It is only to keep the cards in place if you store your game sideways)
Category: 3D Printing