1 / 1
Kingdomino Insert Remixed
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was inspired by the insert at 5443742.I built the insert from scratch, so not technically a remix of the insert.…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This wasinspired by the insert at 5443742.
I built the insert from scratch, so not technically a remix of the insert. I like my inserts to reach the top of the box to help with storage of the box itself. I don't store them vertically, though if I did, it helps out.
- It does need the dispenser at 3784980 to not slide around in the box. It matches the sizing and fits within the box.
- It accommodates theCastles and Bases from 3119646 and has room for the old components. (make sure to downsize the castles to 80%, should only be 33.6mm wide)
- Lastly, it accommodates the3rd player bases at 4569713. (FYI, I resized the height of this base at 180%, so I could do a pause at layer 6 and print with thecastles' bases(above) from 3119646.
Thank you, hope you enjoy!
Category: 3D Printing