Zelda Hyrule Crest Tonie
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Had to be creative and make a couple more Tonies for Easter gifts. I used a great Hyrule Crest design by Mr_MegaTronic…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Had to be creative and make a couple more Tonies for Easter gifts. I used a great Hyrule Crest design by Mr_MegaTronic at https://www.thingiverse.com/thing:24714. This is compatible to the original base I designed (https://www.thingiverse.com/thing:6891274, files posted here as well).
Due to the nature of the design, it's best to print the crest on the back side. So you'll need to glue together.
I noticed when I shrunk it, the top triangle would fall off. So I created a triangular backing.
If you pause it at Layer 18, change the color to yellow to get the crest to pop!
Check out my other Tonie designs, Happy Printing!
Category: 3D Printing