LTT Linus Tech Tips Coin "Do Not Drop" Stand W/Wo Magnet Variations
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stand to hold your LTT coin with optional model for a magnet for Secretlab. READ DESCRIPTION. Multiple Versions
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this model so I can display the LTT Coin on my desk. I have a Secretlab desk, so I decided to make it have a magnet so it won't move around, etc, ( as I do with a lot of my models ). There is also a small lip/pocket for the coin to nestle into to help keep it secure.
If you want to use a magnet, you will need to use supports and super glue it in. Also, make sure to remove ALL of the support so the magnet isn't sticking below the surface of the base of the model. The pocket for the model is .5mm deeper than the 3mm needed for the magnet just to make it easier to achieve this.
The size of the magnet is 60x10x3mm. I have a link below if you want to use the same one I did.
Amazon link for Magnets: https://a.co/d/00WHebke
There are multiple versions of this model for you to choose from depending on whether or not you want a small logo, or magnet, or neither.