BambuLab X2D vibration damping feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vibration damping feet to fit a BambuLab X2d
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Vibration damping feet to fit a BambuLab X2D. You will need four of them.
Nothing complicated, just some TPU feet for the X2D. Designed to fit around the factory feet, and provide a bit of damping and some extra height. No extra parts required, just lift a corner of the printer and slip them in.
I printed these in Elegoo TPU 95a, five walls, five top and bottom surfaces and 25% infill.
Each foot needs about 24 grams of filament.
Its a bit of a compromise to get right, too weak and they will collapse under the weight of the printer, too strong and they won't do so much damping. My figures were a guess, and seem to work OK.