The Ultimate Spinning Top V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A epic battle top made to battle each other and find out who wins with blue prints to design your own attachments! V2
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is version 2 of The Ultimate Spinning Top and can spin significantly faster and longer with a new geared handle coming soon for an even faster and longer spin. This system allows for a easy and fully customizable top for defensive or offensive situations. As well as the weapons can be redesigned and customized by you with the blueprints given to make your own epic weapons and bases.
You can print a stamina base for longevity in the ring or a sharp aggressive base or weapons to destroy your opponents in the ring. You can adjust the speed, time and strength after every run by iterating the system to create the best spinning battle top for your focus.
How to Use:
To use just load the spinner into the handle push the rip cord through the hole in the handle without touching the spinner itself with your hand so it can be pushed in to the max, and after just pull the rip cord as hard and fast as you can while holding on to the handle to get the fastest and best spin.
Basher Large + Weights Weapon:
This weapon has a significantly longer spin time due to the size and the weight distribution on it yo can also experiment with this by trying out new combinations or making your own attachments of other sizes and variations.
Uses a 1/2" Male NPT to 3/8" Female NPT hex bushing that is originally made for pipes and have to use pliers to tap the 3d print and screw it in with the screw. The attachment can also be 3d printed without it.
Geared Handle:
This handle has a 3:1 gear ratio that changes the 4 1/2 spins on the rip cord to 14 spins with the larger gear at the bottom having 30 teeth adding more torque to the spinning top. But to use this one you have to keep it on the floor and can't launch it from above the ground.
Printer Settings That I Used:
All the parts can be printed in PLA
Layer Height 0.12mm
Infill would recommend higher for the weapon and shaft but the other parts can be printed in 15%
Wall Loops 2
Scale:
If you want a larger and more scary design you can scale the whole thing up uniformly and it will still work and function just as well.
Have fun!