Heltec V4 simple case / 3000mAh battery / l76k GPS / Antenna
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple case for Heltec V4 Lora module ** Now use V2, a simpler model to print
- Ocena
- 4 / 5
- Polubienia
- 8
- Pobrania
- 90
- Wydruki
- 2
- Wyświetlenia
- 596
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
V2 update : bottom intergrated with the case housing, Reset use a pin instead of a bottom, added board clip (extra clip not needed anymore), extra space for battery cable, just download v2 files.
Designed for Heltec WiFi LoRa 32 (V4) with GPS module support.
Hardware: 3000mAh battery, PCB, antenna, GPS module (L76K). Three M2×8 self-tapping screws required.
I used support because I mainly print with ABS but I think the case could be printed without support when using PLA.
I also use support to print the button so that the visible part of the button looks better (touching bed).
The board clip might be difficult to clip and that is intentional.
To assemble it, I found that connecting first the antenna ipex, the gps and the battery to the board and then insert the antenna socket in the case, gps, etc.