1 / 1
UNW: FGC9 / FGC6 / FGC68 MKI DIY low rail on UNW Shroud's mod — zdjęcie 1

UNW: FGC9 / FGC6 / FGC68 MKI DIY low rail on UNW Shroud's mod

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

DIY set to turn the older shrouds into low rail ones

Ocena
0 / 5
Polubienia
3
Pobrania
49
Wydruki
0
Wyświetlenia
414
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

this set will have some low rails for the shrouds that I made in the past.
(more will be added here over time)

and there is a drill template that will help you drilling the holes in the right place.


I show here in this video how to update your older shrouds to the low rail version.
 

again to mount the low rail do you need , Flat Countersunk Head M3 Screws in a lengt of 14mm

drilling holes for your m3 bolts is best done with a 2,5mm drill bit.

I will also add a dril jig for the uppers so you can add a view more holes in the upper like the MKII haves so it also can have a bolted on Low rail

Tagi