Meeple & Standee Stand Base — Friction Slot Holder for Thin Tokens (Parametric, OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A weighted clip base that holds any THIN game token upright — cardboard punchboard standees
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
A small weighted clip base that holds any thin game token upright — a cardboard punchboard standee, a thin acrylic or printed silhouette, even a single card edge. The token edge drops into a friction slot with a flared mouth that guides it in, and the wide footprint resists tipping in the easy-to-tip direction (across the slot, not along it). Optional vertical grip ribs pinch flimsy card so it can't flop.
Tune one number. slot_w is the slot width — set it to your token thickness plus a little clearance:
~1.6 mm — thin acrylic / glossy standee
~2.2 mm — standard punchboard cardboard standee (default)
~7.0 mm — a printed meeple silhouette slab
Everything else is parametric: footprint length/width, height, corner radius, slot length/depth, the flared mouth, and the grip ribs (on/off, count, squeeze).
Why it won't tip. A standee tips most easily about the line of its slot, so the base is widened across the slot to give a long anti-tip lever. Keep the slot on the long axis and the stand is hard to knock over.
Print. Flat on the bed, slot opening UP — the slot walls rise vertically, the only taper is the flared mouth, so it prints with zero supports. 0.2 mm layers, 3 walls, PLA or PETG on any 0.4 mm FDM (designed on a Bambu Lab P2S).
Files. meeple_stand_base.stl is one base. meeple_stand_base_plate.stl is a 4×2 grid of eight bases for batch printing. The fully parametric meeple_stand_base.scad source is attached.
