1 / 5
Grip Body Replacement for Ergon GP1 and GP1 Evo Bike Handles — zdjęcie 1
1 / 5

Grip Body Replacement for Ergon GP1 and GP1 Evo Bike Handles

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Printable grip body replacements for Ergon GP1 and GP1 Evo bike handles

Ocena
0 / 5
Polubienia
33
Pobrania
61
Wydruki
0
Wyświetlenia
596
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Print your replacement grip elements and reuse the original clamps.

This model distinguishes between the original GP1 and the newer GP1 Evo clamps.

If you like this design, please consider leaving a ♥heart. Thanks!

----------

Filament choice

Choice of the material makes a lot of a difference for the ergonomics of the grip.

I suggest to use high quality (and if possible, food-safe) filament because the handles are in direct skin contact over longer periods of time. That together with sweat, rain, and sunlight, etc. will apply stress to the material.

Grip hardness:

  • Soft:

    • Use a Shore-hardness of around A88 and 15–20 % Gyroid infill for a soft grip that comes close to the original product.

  • Medium:

    • Increase infill, perimeters and/or Shore-hardness for a more rigid grip that potentially stays intact longer and has an increased torsional rigidity.

  • Hard:

    • Use a filament with a Shore hardness of A95, three perimeters and 15 % Gyroid infill for a quite a hard and rigid grip.

----------

Printing

  • Nozzle: 0.4 mm

  • Filament material: TPU, Shore-hardness somewhere around A88 (semi-soft) to A95 (medium)

  • Layer height: 0.20 mm

  • Supports: No

  • Infill: 15–25 % Gyroid

  • Perimeters: 3

  • Seam position: Rear

  • Fuzzy skin: Outside walls (thickness: 0.3 mm, point distance: 0.8 mm) + Blocker*

  • Brim: 10 mm, outer and inner

  • Notes:

    • *) Add the fuzzy skin blocker model as a modifier and use it to keep the clamp area free (fuzzy skin: none).

    • Use some glue to prevent nasty surprises: My first print was served with a bowl of spaghetti ;)

Mirror the model along the X axis to print the left-hand grip element.

Tagi