1 / 2
Crimping Die Box for short dies for Ideal Crimpmaster and similar crimpers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of @maksym's box. This remix contains two short rows instead of one long and one short row.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remixed Maksym's box to have two short rows to hold the dies that I use with the Ideal Crimpmaster.
Box will handle short dies from most manufacturers as well as most short clone dies.
Used 4-40x 1-1/4 inch screws. Used PETG for the box and PLA/PETG end rolls for the latches.
