Manual shifter inspired Decora light switch cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Decora-style light switch cover inspired by manual shifters
- Ocena
- 0 / 5
- Polubienia
- 119
- Pobrania
- 179
- Wydruki
- 0
- Wyświetlenia
- 2499
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A cover for Decora-style light switches, inspired by classic manual shifters. No MMU or AMS needed.
Required Hardware:
8x Round magnets (6x2mm)
Round double-sided tape (usually 10mm diameter)
Superglue
Assembly Instructions:
Use double-sided tape to attach the rod to the rocker.
Use superglue to stick the magnets to the magnet holders.
Attach round double-sided tape to the back of magnet holder #2 (See image).
Press the case against the original cover. Magnet holder #2 should stay on the original cover, leaving the case removable.
Attach the knob to the rod.
Update June 29: Redesigned the knob to make the font larger. Moved the magnet holders further apart to the corners. See the lighter colour version.
Check out my full collection of light switch covers here: https://www.printables.com/@ETZ_3D/collections/3557286
Keywords: decora, light switch cover, single switch, rocker switch, wall plate, manual transmission, stick shift, gear shifter, automotive, classic car, racing, car guy, garage decor, magnetic, no mmu, no ams, home decor, snap fit, novelty