1 / 8
Spell-Slot Abacus — print-in-place D&D spell-slot tracker — zdjęcie 1
1 / 8

Spell-Slot Abacus — print-in-place D&D spell-slot tracker

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A print-in-place abacus for tracking D&D spell slots: 9 rails (spell levels 1–9) of captive sliding crystal beads…

Ocena
0 / 5
Polubienia
3
Pobrania
4
Wydruki
0
Wyświetlenia
31
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution

A print-in-place spell-slot abacus for D&D 5e and most d20 RPGs. Nine rails are the nine spell levels (1 at the bottom, 9 at the top), each carrying captive crystal beads. The default bead counts — 4 / 3 / 3 / 3 / 3 / 2 / 2 / 1 / 1 — match a full caster's maximum slots. Slide a bead aside to spend a slot; sweep them all back on a long rest.

  • Prints in one piece, ZERO supports. Rails and bead bores are 45° diamonds, so every face self-supports — no bridging over the moving beads. The beads come off the bed already captive on the rail.

  • Tilt-lock carry detent. A low rib at the centre of each rail sits just under the bead bore. Flat on the table the beads slide past it freely; lift or tilt the board and the beads drop onto the rib and can't cross the middle — carry the board without scrambling your count.

  • ~107 × 130 × 8 mm — slips into a dice tray or DM screen pocket.

  • Optional 3-colour (AMS). Frame / beads / numerals as three filaments using the included multi-colour STL: Import → right-click → Split to Parts, assign a colour per part. (The photos show the 3-colour print: black frame, amethyst beads, gold numerals.)

Print:

  • 0.2 mm layers, 3 walls, 10–15 % infill, PLA/PETG

  • No supports, no brim needed — flat on the bed as exported

  • Tip: print the coupon (one rail + 2 beads) first to check the slide fit + rib feel before committing to the full board.

Two files included: the single-colour print-in-place board, and the 3-colour AMS version (split into frame/beads/inlay parts). The OpenSCAD source is attached — every dimension is parametric (rows, bead counts, clearances).

Tagi