Remote head suction cup mount for Yaesu FTM-100
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Permits mounting the control head of the FTM-100 transceiver in vehicle without physical attachment.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Our vehicle has no convenient place to attach an amateur radio transceiver, or even the control head for it. It does have a console panel with a very smooth surface that will permit use of suction cups. While not ideal, they will hold for the duration of a typical trip, and depending on where they are placed, a quick press will reseat them.
With that in mind, I made this mounting base that will accept the control head of my FTM-100 and permit mounting it at a convenient location on the console.
I have enclosed two .stl versions - one with very short legs that sit low, and another with taller legs. I have also included the Fusion file for the main mounting baseplate if anyone wants to modify it and create their own version.
The feet are designed to use a 5mm threaded stud. Plan to tap the threads in the hole.
I found suction cups on Amazon with a diameter of 30mm and 5mm studs, but use any cup diameter that fits your panel.
Print it upright on its feet. Support is not required. I recommend PETG or other material that can withstand the heat of the interior of the vehicle.