1 / 4
Magnetic round head adapter for Godox V350 - for magnetic gels and diffusers — zdjęcie 1
1 / 4

Magnetic round head adapter for Godox V350 - for magnetic gels and diffusers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter for Godox V350 for attaching magnetic accessories intended for the V1, AD100, AD200, either AK-R1 kit or printed

Ocena
0 / 5
Polubienia
1
Pobrania
8
Wydruki
0
Wyświetlenia
71
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Print settings

Your regular print settings. No supports required.

Recommmended materials

  • PETG matte black

  • PC Blend or ASA

  • PLA I didn't test. Might heat up with high power strobes.

  • TPU and print it scaled to 99.2-99.6%

Supports: None

Files included

  • PrusaSlicer (.3MF) project files - just select your preferred filament and printer

  • STEP files you can slice yourself.

Assembly

  1. Check the magnet polarity before installing all magnets if you also use Godox magnetic modifiers. For attaching to the flash head alone, either orientation works. Magnet north should point towards the flash head and south to the subject.

  2. Press twelve 3 × 3 mm neodymium magnets into the holes.

    The magnet pockets are intentionally sized to 3.2 × 3.2 mm for a light press fit on most printers.

    The magnets are fully enclosed behind a thin plastic layer. This slightly reduces magnetic strength but securely retains the magnets without glue and prevents them from being knocked out during use. They are also easy to eventually remove. Slide the adapter on the V350 flash. Should be reasonably tight but not crack your flash head. Do not use extreme force. Better to scale 101% and reprint.

Related models:

Tagi