HK91 / G3 magazine capacity limiter/plug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Limits 20 round HK91/G3 magazine capacity to 15 or 10 rounds. Allows "permanent" installation.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
First of all, sorry that you had to search for this model.
These are magazine capacity limiters for the HK91/G3 magazines to reduce the capacity to 15 or 10 rounds.
The "permanent" installation can be accomplished by putting a Blind Rivet 5/32 x 3/8" into the hole at the bottom.
These can be removed by drilling the rivet out of course - just in case, the communist pigs in state these go to wake up and realize that there is something like the constitution....
THIS IS FOR THE 20 ROUND MAGAZINES, NOT THE LARGER CAPACITY ONES.
To install, simply remove the floor plate, insert the limiter, reinstall the floor plate. Careful - the spring will have some tension...