Card Box - Doubles as Playing Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This card box comes in any size you want and can be used as a playing tray on uneven surfaces!
- Ocena
- 4,667 / 5
- Polubienia
- 258
- Pobrania
- 428
- Wydruki
- 3
- Wyświetlenia
- 2599
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Updates
2026-07-15 added UNO No Mercy (168 cards, 56 x 88 mm), thanks to @Neizo_195722
Description
With this card box you cannot only carry your cards wherever you want - with this box you also can play wherever you want! Just open the box and use the lid as a tray!
If you want a more straightforward model have a look at my Hexed Card Box with Sliding Lid.
Choose your Size!
Under Files, pick the size that fits your decks of cards. Alternatively, copy the onshape model and change the parameters for your own custom card box:
If you miss a size or a size doesn't fit you card deck, please send me a message!
Printing and Assembly
Print with 0.15 layer height with the open hex grid at the bottom.
Use honeycomb with 15% infill.
PLA or PETG are fine.
Tip: Mix and match by using two colors!
Assemble by first inserting the hinge at the side without the gap, then push the other side into the hinge.
Some Background
I often play UNO with my kids on the bed, couch or just ground. Especially new cards tend to slip and slide off the discard pile. So I wanted to design a card box which
can double as a playing tray
is easy to print and assemble
has low filament consumption
is parametric/has a customizable size
and is pleasant to look at
I hope that I achieved these goals. Let me know what you think!