Compact Er11 Collet Case/holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I know there are many er11 collet holder designs already on Thingiverse but I wanted something that was quite compact…
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 140
- Wydruki
- 2
- Wyświetlenia
- 549
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
I know there are many er11 collet holder designs already on Thingiverse but I wanted something that was quite compact while still being able to hold plenty of collets. This design has labeled slots for 1.0-7.0 mm collets in 0.5 mm increments as well as a 1/8, a 1/4 and five blank slots for a total capacity of 19.
The clearance between the cover and the main body is 0.3 mm but I have included the step files if you wish to change this value or relabel the slots.
I printed mine with .15 mm layers using hatchbox wood pla.
Category: Parts