1 / 3
hourglass fidget v3! (Print-In-Place/more stable)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This hourglass fidget v2 is built more stable than V1 and the ball is easyer to print because of the top flat surface!!
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 189
- Wydruki
- 0
- Wyświetlenia
- 752
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (40)Powiązane
Print instructions
- Print the spiral ball and the outer body seperatly
Print settings
supports - no , and also no supports for the ball needed
brim - no
layer height - any (0.2mm is tested)
hightOuterPart ~ 58mm
hightInnerPart = 25mm
adjustable in slicer!

