Articulated Worm Dangle Earring — Print-in-Place Flexi Worm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tiny ~38 mm print-in-place worm that actually wiggles and sways when worn.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution
A tiny articulated worm that hangs from your ear and actually wiggles.
The whole worm prints in one go, FLAT on the bed, with NO supports — then you flex each joint free and it sways like a real little worm.
About 38 mm long, ~8 mm at the head tapering to a pointed tail
5 segments linked by captive teardrop ball-and-socket joints (Ø3.0 ball captive behind a Ø2.3 mouth) — the same proven flexi joint used in larger fidget worms, scaled down but with FDM-absolute clearances so it still frees cleanly at this size
Friendly face: small eyes + an engraved smile on the head
A flat ear loop sits in the bed plane (hole axis vertical) at the head, so it prints supportless and the worm hangs in side profile — the classic worm view, with one eye showing per side
Files:
articulated_worm_earring.scad— fully parametric source (segment count, taper, joint clearances, eyes, loop)articulated_worm_earring.stl— print-in-place, ready to slice
Print:
Belly-DOWN, flat on the bed, NO supports
0.12-0.2 mm layers, 2-3 walls, PLA or PETG
After printing, gently wiggle each joint to break it free
The worm is symmetric left/right, so print twice for a matching pair
Add a jump ring + ear hook through the printed loop (hang from the metal ring, not directly from the ear wire)