Yamaha e-bike battery plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Battery plate used for the Yamaha X1V-00 batteries
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my attempt at recreating Yamaha's battery plate (OEM part number: X1V-F3438-00-00).
It's usually used as a cap on Yamaha's X1V-00 batteries to fit and lock within the battery compartments of the Crosscore RC and Wabash RT ebikes.
The main modifications I did compared to the OEM model are:
1) I filled in the bottom area that interfaces with the battery
2) Made the locking tabs a bit thicker in hopes that will prevent any unintentional battery disconnects (I myself haven't ridden my Crosscore RC long enough to determine the longevity)
There's some additional hardware needed to mount this to the battery and these are what worked for me:
x3 - M4x12mm Socket Head Cap Screws
x1 - M4x8mm Button Head Cap Screw
Optionally, the OEM part seems to have come with x3 M4 bushings/standoffs (which I'm guessing is to protect the part from the screw threads? \_(ツ)_/ ) but I didn't account for those within my version of the model, so I'm not sure if they will fit or not (I also couldn't source the exact bushing/standoffs they used).
I've printed the model twice now and it is a bit of a tighter fit than the OEM (On my CrossCore RC), but I'm sure it will loosen up, given enough time or insertion cycles. I can't vouch on how or if it fits within the Wabash RT's battery compartment, as I don't have access to that bike to test out the fitment.