1 / 5
Clamp for jakob127's IKEA PAX Filament Spool Storage
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clamp to prevent sagging of the 1st and 2nd pieces
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
Clamp for this filament holder.
Since the holder has to be segmented in order to fit on small beds, it can sag as shown in the pictures. I modeled a clamp to fit over the junction. you will require a 4.5mm drill bit to use the same screws that come with the Komplement bars.
Supports needed on either the holes or the grooves for the holder.