Mounting Screw Hole gallery shape - no crack negative volume for using sheet metal screws
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Negative volume for adding no-crack mounting holes. to your creations. Slicer Gallery shape
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
For the slicer gallery, use this mounting hole as a negative volume modifier that you can use to add sheet metal screw mounts to your plastic prints without having the plastic crack as the sheet metal threads cut into the plastic. Features a built in expansion chamber and a split screw holder, and a hole guide for getting a solid plastic base ahead of the expandable screw holder.
Sheet metal screws are great because they self start and cut their way into the material you use them on. But on plastic, they have a tendency to crack the plastic. This negative volume is much like a sheet-rock anchor, but you use it to add a sheet metal mounting point to your 3D printed part. Original size is for a 3 mm screw shaft with wider cutting threads. Depth is 1 inch. Add these to your prints where you want a screw to anchor the print but do not want an embedded machine screw nut.
Good grip, anti-crack. Add to your slicer gallery.