Closed Landscaping Trailer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Second "request" for landscaping gear, a closed trailer. Compatible with barspin's dump truck. Further "requests"…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
Second "request" for landscaping gear, a closed trailer. Compatible with barspin's dump truck. Further "requests" included a lawnmower with a "tank" in the back and a push mower, and I added a rake, shovel, and chainsaw as well.
The trailer design put the hitch a little far back for the truck but the trailer prints really well on the front face so rather than extend the hitch I modeled an add-on extension, hot glued in my build but if printed full size it might work unattached.
Uses the wheel/axle models from the dump truck, so those are not included.
Snap any hinged parts in place. I glued the axles in place using pins as guide rods in the screw holes for alignment.
Print Settings
Printer Brand:
Monoprice
Printer:
Select Mini
Rafts:
No
Supports:
Yes
Resolution:
0.131
Infill:
20%
Filament: YouSu PLA
Notes:
My printer is small, so I printed it at 50% scale, things worked OK though some things needed to be glued. All new parts should match the original model scale.
Category: Mechanical Toys