LayersFactory
Zgłoś model
1 / 11
Ship engine order telegraph inspired 2-gang Decora light switch cover — zdjęcie 1
1 / 11

Ship engine order telegraph inspired 2-gang Decora light switch cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

ETZ.3D

ETZ.3D

@ETZ_3D

A Decora-style double light switch cover inspired by a ship engine order telegraph.

Ocena
0 / 5
Polubienia
46
Pobrania
63
Wydruki
0
Wyświetlenia
1122
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (11)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (60)Powiązane

A cover for Decora-style 2-gang light switches, inspired by ship engine order telegraphs. Not modelled off any particular real-world model, just a general simplification. No MMU or AMS needed.

Required Hardware:

  • 8x Round magnets (6x2mm)

  • Round double-sided tape (usually 10mm diameter)

  • Superglue

Assembly Instructions:

  1. Glue the badges to both sides of the case.

  2. Use double-sided tape to attach the contact pads to the rocker. The opening should be placed on the outside.

  3. Use superglue to stick the magnets to the magnet holders.

  4. Attach round double-sided tape to the back of magnet holder #2 (See image).

  5. Press the case against the original cover. Magnet holder #2 should stay on the original cover, leaving the case removable.

  6. Attach the handles to the contact pads.

All files are pre-oriented for the best printing results.

Update June 29: To get a smooth finish on the curved surface, I printed the case sideways (as oriented in the file). However, this resulted in the corners above the magnet holders being slightly uneven (see photo). I drafted a simple corner decor to cover them up. Just print 4x decor and an alignment tool, and glue them to the case. Of course, this is totally optional. 

Check out my full collection of light switch covers here: https://www.printables.com/@ETZ_3D/collections/3557286

Keywords: decora, light switch cover, double switch, rocker switch, wall plate, nautical, ship, telegraph, steampunk, marine, engine order telegraph, boat decor, magnetic, no mmu, no ams, home decor, snap fit