Heltec T096 with 21700 case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Heltec T096 with 21700 case for Meshcore or Meshtastic
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 235
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I couldn't find any cases for the T096 that used 21700 lithium ion batteries so I made one. Feel free to contact me for Fusion 360 files, etc.
Parts
Heltec T096
21700 cell
SMA antenna with pigtail
Assembly
Attach battery lead to battery. I soldered the wires to some nickel strips and then spot welded them to the battery.
I put a couple of drops of hot glue on the two battery rails to secure it in place. Any glue will work though.
Slide T096 in rail. I did not need glue for this.
Attach antenna
Attach battery to T096 after antenna is attached
I super glued the top and bottom case together by putting the glue on the interior of the overlap section so the glue would push inside instead of outside the case during assembly