Nikon F-36 Motordrive Bodenplatte Schutzplatte bottom plate protection
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nikon F-36 Motordrive Bodenplatte Schutzplatte bottom plate protection
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Eine Schutzplatte für den Batteriepack des Nikon F-36 Motordrive. Damit die Ecken und der Boden des guten Stückes nicht allzusehr abgeschlagen werden. Leider ist die Lackqualität nicht die selbe wie bei der Kamera. Der Zugriff zu den Batterien ist gegeben.
Die Platte ist so dimensioniert, daß die Fläche und die Seitenwände mit DC-Fix Velour beklebt werden können.
Die Schraube sollte mit einer Layerhöhe von 0,1 mm oder niedriger gedruckt werden. Bei meinem Teil paßt die 11 mm lange Schraube, aber falls sie zu lang ist nimmt man die 10 mm lange Schraube.
....................................
A protective plate for the battery pack of the Nikon F-36 Motordrive. This prevents the corners and bottom of the unit from getting too damaged. Unfortunately, the paint quality isn't the same as on the camera itself. Access to the batteries is maintained.
The plate is sized so that the surface and sides can be covered with DC-Fix velour.
The screw should be printed with a layer height of 0.1 mm or lower. The 11 mm screw fits my print, but if it's too long, use the 10 mm screw.