1 / 2
Spiral Twist Cylinder (2-Versions included)ai Thumbnail — zdjęcie 1
1 / 2

Spiral Twist Cylinder (2-Versions included)ai Thumbnail

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Here are tho tested and printed Spiral Twist Cylinders that are easy to print and downloadable in many diffrent forms

Ocena
0 / 5
Polubienia
11
Pobrania
62
Wydruki
0
Wyświetlenia
172
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Tired of spiral fidget toys that constantly fall apart or jam?

These Vortex Spiral Passthrough Cylinders completely reimagine the classic spiral design. By engineering a precise, interlocking gear-like mechanism right at the top face, the moving segments are physically locked into perfect alignment. You get a fascinating, fluid twisting movement where the inner core seamlessly glides through the outer sleeve—completely smooth and without any risk of the pieces separating.

Quick Slicing Guide

  • The Elephant’s Foot Fix: Make sure to apply "Elephant's Foot Compensation" in your slicer. If the first layer squishes too much, the interlocking guide links will fuse together and won't move!

  • Perimeters: Set your walls to 2–3 perimeters to give the small joint connections and guide tracks maximum strength.

  • Layer Thickness: Use 0.2mm or less to make sure the curved outer shell and twisting slots feel completely seamless in your hand.

  • Material Choice: Silk PLA is the absolute best option here, as it beautifully highlights the metallic shimmer and moving shadows along the spiral seams.

Sizing & Sound Tuning

  • Infill determines the acoustics: The clicking and sliding sound depends entirely on your internal structure. Dropping your infill down to 0–5% creates a louder, higher-pitched sound, while a dense infill results in a heavier, much quieter tone.

  • Perfect Balance: The model is natively designed to fit perfectly in your hands, making it incredibly satisfying to push, twist, and slide the cylinders through each other.

  • Want a different scale? The geometry is easily adjustable right inside your slicer if you want to experiment with scaling the cylinders up or down.

Zero supports required! The steep overhangs and spiral slopes are completely self-supporting.

ai Thumbnail

Tagi