1 / 1
Watch Charger Puck for Fossil Smartwatches
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The easy way to take your Fossil smartwatch charger on the go
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 317
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Watch Charger Puck is a cable organization device for a smartwatch charger, this particular model is for Fossil smartwatch chargers. The puck keeps the cable out of the way and tidy when stowed, while allowing the perfect length to be unraveled for use.
Accolades
★★★★★ “Pretty handy” -Mom
★★★★☆ ‘Good to chew on, didn’t get to the cable' -Dog
(more to come)
Assembly

Figured showing assembly was easier than describing it
Printing
| Printer | Creality Ender 3 Pro (Modded) |
| Filament | Overture 95A TPU* |
| Resolution | 0.4mm nozzle @ 0.2mm layer height |
| Structure | 0.8mm walls, 20% cubic infill |
| Supports | No |
*Please note this model will work only if printed in TPU, non-flexible filaments will not work