1 / 2
End Cover for Phoenix Contact PT 2.5 Terminal Block — zdjęcie 1
1 / 2

End Cover for Phoenix Contact PT 2.5 Terminal Block

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A replacement end cover for Phoenix Contact PT 2.5 terminal blocks

Ocena
0 / 5
Polubienia
1
Pobrania
7
Wydruki
0
Wyświetlenia
83
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

A precise 3D-printable replacement end cover for Phoenix Contact PT 2.5 feed-through terminal blocks. Perfect for safely sealing off the open side of your DIN rail terminal stack.

Print Settings

  • Material: ASA (Recommended for temperature resistance and durability in control cabinets).

  • Main Body Layer Height: Default (e.g., 0.20 mm)

  • Snap-on Tabs (Nubs) Layer Height: 0.12 mm

💡 Tip: Use variable layer height in your slicer. Keep the main body at your default settings, but detail the small snap-on tabs down to 0.12 mm. This drastically improves layer adhesion and prevents the tiny nubs from snapping off when clicked into place.