1 / 2
LRS-200/250 DIN rail mount w/ Cap Screws for Vcore3 400 — zdjęcie 1
1 / 2

LRS-200/250 DIN rail mount w/ Cap Screws for Vcore3 400

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I didn't have the countersink screws used in original, but SH cap screws are abundant in my shop. Uses m4 DIN912 10mm SH

Ocena
5 / 5
Polubienia
15
Pobrania
201
Wydruki
1
Wyświetlenia
1552
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

As with the original, only fits the Vcore3-400 spacing as defined by the spacing between the mounting holes in drawing for the backplate.

I also fixed an incomplete fillet and removed the descriptive text on the side as it seemed to add unnecessary movement complexity and some added time. Just a personal preference. 

To use different length screws, take stp and extrude the difference between your length and 10 from the backside. Do not overtighten as it risks damaging the circuit board immediately beneath the screw holes.