Magnetic Spice Tin Holder / Gewürzregal (magnetisch)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall-mounted holder strip for round metal spice tins. Each strip holds 3 tins side by side, secured by magnets. Mount
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
Magnetic Spice Tin Holder (Wall-Mounted, 3-Tin Strip)
A wall-mounted holder strip for round metal spice tins. Each strip holds 3 tins side by side, secured by magnets. Mount multiple strips vertically to build a full spice rack inside a cabinet door or on any flat surface.
Features
Holds 3 round metal spice tins per strip
Magnetic retention — tins snap in and stay put, easy to remove with one hand
Wall-mounted with screws (recommended)
Stack multiple strips to build a full spice rack — the spacing is up to you
Fits round metal tins with a diameter of 57–66 mm
Dimensions: 206 × 72 × 30 mm
Required Hardware (per strip):
9× neodymium disc magnets, 10 mm diameter × 2 mm height (3 per tin position)
The magnets press-fit into the printed recesses. No glue required if tolerances are correct, but a drop of CA glue ensures they stay in place permanently.
Print Settings
Material: PLA or PETG
Supports: None
Walls: 4+ perimeters recommended for strength
Layer height: 0.2 mm
Infill: 15–20% (the walls do most of the structural work)
Assembly
Print the strip.
Press or glue 9 magnets into the designated pockets (3 per tin position — two in the base, one in the back wall). Pay attention to magnet polarity — all magnets should attract the tin, not repel it.
Mount the strip using screws through the mounting holes.
Drop in your tins. Done.
Mounting Tips
For a clean cabinet installation, space your strips evenly and account for the tallest tin in each row. The strips shown in the photos are mounted on a bare wood panel inside a kitchen cabinet using screws.
Compatibility
Tested with round metal spice tins (57–66 mm diameter) from:
Schuhbeck Gewürze
Gewürze der Welt
Herbaria
Other round metal tins within the 57–66 mm diameter range should work as well. The magnetic hold depends on the tin material — standard tinplate works best.