Baseball card storage rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple storage tray/rack for standard-sized baseball cards. Holds ~450 cards, depending on card stock and condition.
- Ocena
- 5 / 5
- Polubienia
- 86
- Pobrania
- 844
- Wydruki
- 3
- Wyświetlenia
- 2885
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- GNU General Public License v3.0
A simple storage rack for holding baseball/trading cards (~64mm x 89mm). Racks have a slight draft angle on the sides to improve rigidity and allow for easier stacking. Reliefs at ends for easier insertion/removal access. Intended for 'mass storage' and not 'ideal' protection.
I have printed copies from PLA and PETG, a 10% infill is fine since the majority of the part is just perimeters anyway (using 0.6 nozzle), but I haven't tested higher fills for more robust stacking.
For my application I don't have a need for lids, but if it would be beneficial, please feel free to reach out and I could toss an update together.