Enclosure for Heltec V3 with space for 18650 battery holder. Meshtastic/Meshcore/LoRa 32
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printable enclosure for the Heltec V3 with a dedicated space for a 18650 battery holder and a customizable ID plate
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 487
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This enclosure is designed for the Heltec V3 and provides a clean and practical housing for portable projects.
It includes a dedicated space for a 76 × 20 × 21 mm 18650 battery holder and a customizable front ID plate that can be used for numbering, labels or your own custom design.
A simplified reference model of the Heltec V3 is shown in some of the preview images to illustrate component fit and internal layout. The reference model is not included in this download and is intended solely for visualization and fit verification during the design process.
The following hardware is required for assembly:
2 × M2×6 mm screws
4 × M2×8 mm screws
2 × M2×20 mm screws
An alternate version of the enclosure includes a cutout for a panel-mount slide switch. The switch should have approximately the following dimensions:
Body length: 20 mm
Body width: 6 mm
Body height: 5.5 mm
Mounting hole spacing: 15 mm