Baily Pottery Wheel Tool Caddy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tool caddy for a Bailey ST-XL wheel that hooks to the side of the wheel pan to keep small miscellaneous tools handy
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 249
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Keeping all the small tools and ribs close at hand makes throwing easier and quicker. This tool caddy fills the bill.
I printed two versions, the standard and a mirror image to have a left and right hand caddy, but you can print two of the same and they'll fit just as well. It's a personal preference.
While the drain holes are small, some tools like a needle tool or knife can stick through. You can put a piece of screen material in the bottom of the caddy to prevent them sticking through.
To simplify the design, I printed a small standoff block to support the caddy against the pan wall and keep it vertical. I just glued them to the back using super glue.
Printed with PLA+, two perimeters, 10% infill
Supports are required under the hook section